Post by archie on May 2, 2012 5:41:06 GMT -5
TEH-RX White Wolf
carbon brazed chassis version of the frame
Front: One way
Rear: Solid Axle
Silver Carbon
Gun Metallic Aluminum Parts
Include Counter Drifting Pulley Set
(Front Pulley 39T, Front Center 15T, Rear Center 18T, Rear Pulley 32T)
High Performance Damper Set
Newly designed suspension arms
Officially listed! The four-color choice! Stock!
This is a full upgrade version of the frame factory standard head single straight tail, anti tire. The empty frame. From the RX frame based on the full upgrade, Block C: CNC metal and CNC metal knuckle, CNC metal rear wheel section, CNC metal sponge plate (long), CNC metal steering system.
You can also buy the R31.
Frame configuration:
Black pure carbon brazed chassis, on the second floor panels, front and rear suspension bracket.
CNC the imitation TRF metal hydraulic shock absorbers
CNC metal before and after the Polish box bracket
CNC metal arm code
Increase:
CNC metal, Block C,
CNC metal knuckle
CNC metal rear wheel section
CNC metal steering system
CNC metal sponge plate (L)
Two belt drive (4WD)
High-speed standard with the pattern drift tires
Standard anti-fetal (1.6)
Standard CNC metal head and a single
Standard CNC metal tail straight
Standard CNC large tooth diazepam (original car with no)
Standard 7075 motor gear
The entire vehicle supporting the 10.9 Taiwan SHCS
7 degrees and 4, Block C, standard
The car factory is the maximum angle of turn: a maximum of 50 degrees
This car does not contain any electronic equipment.
carbon brazed chassis version of the frame
Front: One way
Rear: Solid Axle
Silver Carbon
Gun Metallic Aluminum Parts
Include Counter Drifting Pulley Set
(Front Pulley 39T, Front Center 15T, Rear Center 18T, Rear Pulley 32T)
High Performance Damper Set
Newly designed suspension arms
Officially listed! The four-color choice! Stock!
This is a full upgrade version of the frame factory standard head single straight tail, anti tire. The empty frame. From the RX frame based on the full upgrade, Block C: CNC metal and CNC metal knuckle, CNC metal rear wheel section, CNC metal sponge plate (long), CNC metal steering system.
You can also buy the R31.
Frame configuration:
Black pure carbon brazed chassis, on the second floor panels, front and rear suspension bracket.
CNC the imitation TRF metal hydraulic shock absorbers
CNC metal before and after the Polish box bracket
CNC metal arm code
Increase:
CNC metal, Block C,
CNC metal knuckle
CNC metal rear wheel section
CNC metal steering system
CNC metal sponge plate (L)
Two belt drive (4WD)
High-speed standard with the pattern drift tires
Standard anti-fetal (1.6)
Standard CNC metal head and a single
Standard CNC metal tail straight
Standard CNC large tooth diazepam (original car with no)
Standard 7075 motor gear
The entire vehicle supporting the 10.9 Taiwan SHCS
7 degrees and 4, Block C, standard
The car factory is the maximum angle of turn: a maximum of 50 degrees
This car does not contain any electronic equipment.